TOOLING & MOLDED PARTS

Injection Mold Tooling and Molded Plastic Parts

Production molds and molded plastic parts, planned from a full DFM report before steel is cut, with T1 samples, dimensional reports and machined inserts or brackets supplied under the same project.

Request a Quote
Detailed molded component geometry

What our mold DFM report covers

Every new mold starts with a written DFM report. Each issue is shown on the part model with a proposed change, so decisions are made before steel is ordered.

General data

Resin, shrinkage, cavity layout, mold type, mold base and insert steels, hardness and target press size.

Parting line & gate

Parting line position, allowable mismatch, gate type, size and location, and the visible gate vestige.

Draft & wall thickness

Draft on every releasing face, wall-thickness analysis and predicted sink, with coring proposals where needed.

Actions & release

Slides, lifters, unscrewing cores, ejector layout or stripper plates, and features better finished by post-machining.

Cooling

Cooling channel layout in cavity, core, slides and inserts to balance cycle time and part flatness.

Surface finish

SPI polish or texture per surface, agreed against the cosmetic requirements of the part.

Thread & detail changes

Thread run-outs, sharp edges and small features adjusted for reliable filling and release.

Acceptance

T1 sample plan, dimensional report, cosmetic criteria and the sign-off needed to release production.

Tooling FAQ

What do you need to quote a mold?

A 3D model (STEP), a drawing with critical dimensions, the resin grade, expected annual volume and any cosmetic requirements. With these we can propose cavity count, steel and mold construction.

Who owns the mold?

The customer who pays for the tool owns it. Molds are marked with your part number and can be maintained for production with us or shipped on request.

Do you supply T1 samples with a report?

Yes. T1 samples are shipped with a dimensional report and the process settings used, so any adjustment before production is based on measured data.

WhatsApp