ENGINEERING EXAMPLES

CNC Machined Part Examples for Robotics and Automation

Examples in 5-axis machining, turning, mold making and metal 3D printing. Each one describes the component, the manufacturing route and the inspection plan.

Request a Quote

Components by type

Engineering considerations we review for the most common part families we manufacture.

Housings & covers

Machined aluminum robot joint housing with bearing seats, ribs and cable passages

Pockets, bores and mounting faces locate internal assemblies. Review wall thickness, cutter access, internal radii and sealing or bearing interfaces.

Inspection priorities: Bore position, mounting datums, flatness and finish masking. A displaced bore or coated mating face can prevent assembly.

Read the engineering notes

Shafts & bushings

Turned aluminum shaft with threads and stepped features

Stepped diameters, shoulders, grooves and threads are coordinated around coaxial features. Secondary flats and cross-holes may require milling or drilling.

Inspection priorities: Mating fits, datum references, runout, roughness and threads. Poor coaxial control can increase drag or affect rotating alignment.

Read the engineering notes

Robotic gripper & interface components

Industrial robot gripper with machined aluminum plates and fingers

Joint, gripper and end-effector components require suitable access for fasteners, motion and assembly. Review pivot locations and the relationship between mounting features.

Inspection priorities: Joint alignment, bore location, contact surfaces and any weight-sensitive sections.

Read the engineering notes

Mounting brackets & supports

Machined aluminum mounting assembly with bearing seats

Supports connect motors, bearings, sensors and structural members. Review machining datums, clamping access, hole patterns and the relation between mounting planes.

Inspection priorities: Hole location, mounting-plane alignment, threads and deburring. Pattern errors can force fasteners or shift the attached motor or sensor.

Read the engineering notes

Fixture & locating components

Black anodized machined mounting block placed on its engineering drawing

Locating blocks, pins and support features establish a controlled relationship to the workpiece. Review loading access, clearance and mounting of the fixture itself.

Inspection priorities: Locating geometry, reference faces, contact surfaces and replaceable wear features.

Custom machined parts

Gears, racks & transmission components

Black oxide helical pinion meshing with a machined gear rack

Gears, racks, worms and timing pulleys require a drawing-specific review of tooth geometry and the manufacturing route. Specify module or pitch, pressure angle, tooth count, mating geometry, material and heat treatment.

Agree tooth accuracy, backlash, datum references and the required inspection evidence. Tooth cutting, heat treatment, finishing and gear inspection are planned together with the quotation.

View the bevel gear example

Other custom equipment components

Threaded parts & spacers

Define thread type, engagement, shoulder length, mating faces and deburring. Review inspection of the features that locate the assembly.

Panels & replacement parts

Confirm the current drawing, mounting pattern, cutouts and finish. For a replacement, identify any fit or interface changes before manufacture.

Complex profiles

Review the model, cutter access, thin sections and mounting datums. Specify balancing or special testing separately where needed.

PROJECT INQUIRY

Submit the requirements for a similar component

Send the current drawing, material, quantity and any inspection or finishing requirements. An engineer replies within one business day.

Request a Quote
WhatsApp