Wall thickness
Keep wall thickness as consistent as the design allows.
MOLD MAKING
Injection mold making in China with a written DFM report, P20, H13 and S136 tool steels, side actions and unscrewing cores, planned around part geometry and the intended production run.


FROM PART TO TOOL
An effective mold starts with the part design. We review draft, wall thickness, gate and parting line considerations, surface requirements, and expected quantity before tooling details are finalized.
BEFORE STEEL IS CUT
Keep wall thickness as consistent as the design allows.
Include draft on faces that release from the mold.
Identify cosmetic faces and any critical fit features.

TOOL FINISH & T1 SAMPLES
Tool material and molded resin selection depend on the part’s volume, texture, wear, temperature, and structural needs. We discuss these together rather than treating the mold as an isolated purchase.
Cavity count is chosen from annual volume, part size and the required consistency between cavities.
Slides, lifters and collapsible features for undercuts, side holes and snap fits.
Rotating cores for internal threads on caps, fittings and connectors.
Aluminum or soft steel tools for early samples and pilot quantities before a production tool is justified.
Mold steel is selected from the resin, the expected number of shots, the surface finish and whether the resin is abrasive or corrosive. The choice is stated in the DFM report and the quotation.
Parting line, gate, draft, wall thickness, cooling and ejection, with proposed design changes shown on the part model.
Cavity and core inserts machined, heat treated and finished by EDM and polishing.
First shots are molded, measured and reviewed against the drawing and cosmetic requirements.
Corrections are agreed, the process window is recorded and the tool is released for molded production.

A 3D model of the plastic part, the resin, annual or lifetime quantity, cosmetic requirements and any critical fits. A drawing with tolerances helps us define the inspection scope for samples.
Mold ownership and storage terms are stated in the quotation and order documents before the tool is built.
Yes. After sample approval, molded parts can be supplied from the same tool, together with machined inserts or brackets for the same assembly.
It depends on mold size, cavity count and complexity. The schedule for design, build and T1 is stated in the quotation.
Molds and injection molding overviewMold tooling reviewInjection moldingUnscrewing mold example
LET’S TALK ABOUT YOUR PART
Tell us the resin, the expected shots over the mold life and any cosmetic faces. We will come back with a mold layout, the steel we would use and the questions that affect the price. Or email the drawing to info@tovilon.com.