Aluminum alloys
6061-T6, 6082-T6 and 7075-T6 for housings, brackets, plates and lightweight robot structures. Anodizing, hard anodizing and bead blasting are common finishes.
CNC MACHINING
Low-volume CNC machining in China from 1 piece: milling, turning and 5-axis routes selected around the geometry, material and assembly requirements of each OEM component.


Pockets, profiles, hole patterns and multiple mounting faces. Review tool access, internal radii and setup datums.
View details
Coaxial diameters, bores, grooves and threads. Review clamping, stock condition and secondary features.
View details
Locating geometry and mounting interfaces that support a controlled assembly or manufacturing setup.
View detailsMulti-face housings, angled interfaces and curved surfaces may benefit from five-axis machining. Many of these parts only need indexed 3+2 positioning; simultaneous five-axis is for continuous contours.
Five-axis machining applications and engineering reviewDevelopment parts are made to the current drawing, with the measurements you need for the assembly trial. Repeat orders are made to the approved revision, material, finishing and inspection plan. Typical production lead time is 7 to 30 days, depending on how complex the parts are and how many you need. It is counted from order confirmation and receipt of the payment due before production, as stated on the quotation, to the day the inspected parts are packed and ready to ship. Shipping transit time is not included and is confirmed separately on the quotation. If the material is not in stock and has to be bought in, allow up to about one more week.
Compare production stagesThe ranges below describe typical limits for custom CNC machined parts. Every drawing is reviewed individually, and the achievable tolerance depends on material, size, wall thickness and the feature being controlled.
6061-T6, 6082-T6 and 7075-T6 for housings, brackets, plates and lightweight robot structures. Anodizing, hard anodizing and bead blasting are common finishes.
303, 304, 316, 17-4PH and alloy steels for shafts, fittings and wear surfaces, with passivation, heat treatment or coating as specified.
POM, PA, PC, PEEK and brass or copper alloys for insulating, low-friction and conductive components.
We check datums, tolerances, tool access, internal radii and finish allowances, and return open questions with the quotation.
The quotation states the machining route, material, finish, inspection scope and lead time for your quantity.
First parts are machined and measured against the drawing revision, with a dimensional report for approval.
Programs, fixtures and the inspection plan are kept under revision control for every following order.
Yes. The minimum order is one piece, and the same drawing review and inspection approach is used for prototypes, pilot lots and repeat production.
Prismatic parts with pockets and hole patterns are usually milled, rotational parts are turned, and multi-face or angled features may suit 5-axis machining. The route is proposed in the quotation after reviewing the model and drawing.
A STEP model and a PDF drawing with the current revision, material grade, quantity, finish and any inspection requirements. Tolerances, threads and datums should be shown on the 2D drawing.
Lead time depends on the complexity of the parts, the quantity, finishing and material availability. Typical production lead time is 7 to 30 days, depending on how complex the parts are and how many you need. It is counted from order confirmation and receipt of the payment due before production, as stated on the quotation, to the day the inspected parts are packed and ready to ship. Shipping transit time is not included and is confirmed separately on the quotation. If the material is not in stock and has to be bought in, allow up to about one more week. The lead time for your parts is stated on the quotation.
PROJECT INQUIRY
Add the quantity for this order and what you expect over the next year. We reply with questions or a quotation that states the route, finish, inspection and lead time. Or email the drawing to info@tovilon.com.
Request a Quote