Assembly interfaces
Say which faces, bores and threads have to match the installed parts. Those are checked against your drawing, and the rest can follow general tolerances.
MADE TO DRAWING
Custom machined parts, mechanical components and replacement parts for machinery and equipment, made to your drawing. A typical order is a mixed list: a few housings, some shafts, a bracket and a replacement part for an older machine, in different materials, quoted and delivered together.
PART FAMILIES
Part families that come up regularly in mixed orders.

Combine milling, turning and finishing for your component.

Mounting flanges, locating plates and fixture interfaces for automation equipment.

Circular joint interfaces, internal pockets and mounting faces for articulated mechanisms.

Machined openings, engraved legends and mounting holes for equipment panels.

Curved arm profiles, bearing bores and mounting faces; review tool access, wall thickness and datum transfer.

MIXED ORDERS
Many custom part orders are a list rather than one part in quantity. Each item gets its own route, so a housing goes to milling, a shaft to turning and grinding and a plate to wire EDM, while the order is handled as one and each part number stays tied to its own drawing revision.
INTERFACES & VOLUMES
Say which faces, bores and threads have to match the installed parts. Those are checked against your drawing, and the rest can follow general tolerances.
Mark the few dimensions that decide whether the part fits. Everything else can be made and checked to a general tolerance, which keeps the price down.
If you will need the part again, give a rough yearly quantity. It decides whether a fixture or a saved program is worth making now.

OPERATING ENVIRONMENT
If an original steel part wore out, a harder grade or a different finish may last longer. If it was steel only because it was easy to buy, aluminum may do the job at lower weight. Tell us what the part does and what it is exposed to, and we can suggest an alternative where it makes sense. The decision stays with you.
Most custom parts need more than one process. A housing may be milled and anodized, a shaft turned, hardened and ground, and a bracket cut by wire EDM before final machining. We plan the whole route in the quotation, so you receive finished, inspected parts against one order.
See the industries we supply and the transmission parts we machine.
Part examples made to drawing: an automation fixture with locating pins, a telescoping tripod stand assembly and anodized aluminum pocket cases.
Yes. Parts in different materials and processes can be quoted and delivered together, with each part number tracked to its own drawing revision.
Yes. Bearings, bushings and threaded inserts can be pressed in, and parts can be kitted and labeled by assembly so they are ready for your line.
After first articles are approved, the drawing revision, material, route, fixtures, programs and inspection plan are recorded for the part number. Repeat batches are made and checked to that release.
Yes, from a current drawing or model. Tell us which interfaces must match the installed parts so fits, threads and mounting patterns are confirmed before machining.
A STEP model and PDF drawing with the revision, material, quantity, finish and the features that control assembly. An engineer replies with questions or a quotation within one business day.
LET’S TALK ABOUT YOUR PART
Drawings and models are best. For a replacement part without a current drawing, tell us what you have and we will say what is needed to quote it. Give the quantity of each item and which parts go together. Or email the drawing to info@tovilon.com.