CNC TURNING & GRINDING

Precision Stainless Steel Drive Shaft

A typical stepped drive shaft for a linear actuator, combining ground bearing journals, a precision thread, a keyway and cross holes in 17-4PH stainless steel.

Request a Quote
Single-point carbide turning insert cutting the outside diameter and shoulder of a rotating metal shaft

Typical requirements

Component
Actuator drive shaft
Material
17-4PH stainless, H1150 condition
Process
CNC turning, milling, cylindrical finishing
Critical features
Bearing journals ±0.005 mm, runout 0.01 mm
Finish
Passivated
Inspection
Micrometers, CMM, thread gauges

Engineering considerations

  • Two bearing journals at opposite ends need to run true to each other within 0.01 mm TIR.
  • A keyway and cross holes need to be positioned relative to the journal axis.
  • The shaft’s length-to-diameter ratio makes it prone to deflection during turning.
  • Passivation must be applied without affecting the journal fits.

Typical manufacturing route

01

Material & condition

Bar stock is purchased in the specified heat-treated condition with mill certificates traceable to the batch.

02

Turning

Turned between centers with a steady rest support, leaving finishing stock on the journals.

03

Secondary operations

Keyway and cross holes are milled on a fixture locating from the turned diameters.

04

Finishing & passivation

Journals are finished to size; parts are passivated and protected in individual sleeves.

Typical inspection plan

  • Journal diameters measured with micrometers on every part; runout checked between centers.
  • Keyway width, depth and position verified on CMM on first articles and by sampling plan in production.
  • Threads checked with go/no-go ring gauges; material certificates supplied when the order requires them.
Dial indicator on a stand checking a turned part
A dial indicator reading a turned diameter. Runout and fit diameters are checked against the datums on the drawing.

Applying this to your part

The actual route, tolerances, inspection scope and records are agreed for each drawing during quotation.

PROJECT INQUIRY

Request a quotation for a similar component

Send the drawing, material, quantity and the features that control assembly. An engineer replies within one business day; NDAs are signed on request.

Request a Quote
WhatsApp