CAPABILITIES

CNC Machining Capabilities, Tolerances and Equipment

5-axis machining, CNC milling and turning, wire EDM and grinding for complex mechanical components, supported by surface finishing, mold making, 3D printing and CMM inspection. Orders start from one piece.

Request a Quote
Row of 5-axis machining centers in a Shenzhen machining workshop

Capability specifications

Typical values for planning. The achievable tolerance for each feature depends on size, material, geometry and finish, and is confirmed during drawing review.

ProcessWorking rangeTypical precisionTypical parts
5-axis machiningMulti-face parts, indexed 3+2 and simultaneous±0.01 mm on critical bores and facesRobot joint housings, links, sculpted covers, angled brackets
CNC millingVertical machining centers, 600 to 1800 mm X travelMachine positioning ±0.003 mm / 300 mm (machine specification); critical part features ±0.01 mmHousings, plates, manifolds, fixtures
Gantry machiningTwo gantry machines with 2500 × 2000 × 900 mm and 2000 × 1000 × 400 mm machine travel. Usable part size depends on weight and fixturing and is confirmed at drawing review.Machine positioning ±0.003 mm / 300 mm (machine specification); critical part features ±0.01 mmMachine bases, large frames and plates
CNC turningØ4 to Ø500 mm, length up to 700 mm±0.005 mm on diametersShafts, sleeves, flanges, couplings
Slow-wire EDMUp to 600 × 400 mm table travel±0.002 to 0.003 mmHardened inserts, keyways, profiles, punch and die parts
GrindingSurface grinding, 1000 × 400 mm table; internal grindingFlatness 0.005 mm / 300 mm; Ra 0.4 µmLocating plates, wear strips, gauge blocks
Surface roughnessAs-machined to groundRa 1.6 µm machined; Ra 0.4 µm groundSealing faces, bearing seats
Order quantityFrom 1 piecePrototype, pilot and repeat batchesTypically 7 to 30 days, confirmed on each quotation. Lead time details

Machine travel and part size. Travel figures describe the machine. The largest part we can accept also depends on fixturing, tool reach and the machining direction, so the maximum size for your part is confirmed during drawing review.

Inspecting large parts. Parts that fit the bridge CMMs (up to 800 × 1000 × 600 mm) are measured there. For larger parts, the method is agreed during drawing review, for example height gauges on the 800 × 1200 mm granite plate, gauges and templates for hole patterns, or section by section measurement, and the report scope is stated on the quotation.

Production and inspection equipment

Indexable face mill above a clamped round aluminum workpiece in a machining center

Machining

  • 5-axis CNC machining centers
  • Vertical machining centers, 600 to 1800 mm X travel
  • Gantry machining centers, up to 2500 × 2000 × 900 mm travel
  • Gantry mill, 2000 × 1000 × 400 mm travel
  • CNC lathes, Ø4 to Ø500 mm
  • Conventional milling, drilling and tapping

Precision & finishing

  • Sodick ALN400Qs and ALN600Qs slow-wire EDM
  • Fast and medium wire EDM for large profiles
  • Surface and internal grinding
  • Laser marking, ultrasonic cleaning, vibratory finishing and polishing

Inspection

  • Bridge CMM, 700 × 1000 × 600 mm
  • Bridge CMM, 800 × 1000 × 600 mm
  • 2D vision measuring system
  • Portable roughness tester, Rockwell and Leeb hardness testers, coating thickness gauge
  • Height gauge, thread, ring and pin gauges
Wire EDM area with several slow wire machines
Slow wire EDM machines for hardened inserts, punches and fine profiles.
How inspection is planned and reported

Inside the workshop

Milling, 5-axis and turn-mill work, then CMM inspection on the critical features. 25 seconds of real shop-floor footage.

CNC Machining in Shenzhen: 5-Axis Milling, Turn-Mill and CMM Inspection

Watch on YouTube

Complete the manufacturing route

OperationWhat we provide
Heat treatmentQuench and temper, case hardening, nitriding and stress relief, with hardness verified after treatment.
Surface treatmentClear, black and hard anodizing, passivation, black oxide, nickel and zinc plating, bead blasting and powder coating, with masking of fits and threads. Materials and finishes.
Dimensional inspectionCMM and gauge inspection of the features that control assembly, reported against the drawing revision. Inspection and acceptance.
Assembly & packagingPressing of bearings, bushings and inserts, kitting, part marking and protective packaging for export shipment.

Capability FAQ

What is the largest part you can machine?

Gantry machining centers travel up to 2500 × 2000 × 900 mm and lathes turn up to Ø500 mm. The largest part we can accept also depends on fixturing, tool reach and machining direction, and is confirmed during drawing review. Large parts are reviewed for fixturing, stress relief and inspection access before quotation.

Do you machine hardened materials?

Yes. Hardened tool steels and inserts are finished by slow-wire EDM and grinding after heat treatment; hardness is verified on Rockwell or Leeb testers.

Can you combine CNC machining with 3D printing or molding?

Yes. Metal printed parts are routinely CNC-finished on sealing faces, bores and threads, and molded parts can be supplied together with machined inserts or brackets under one order.

WhatsApp